5um,0.5um,2um,0.2um325 * 660 Non - Woven Dust Filter Cartridge With Square End Cap Easy To Install

Dust filter cartridge

Product features:

Filter is a certain length of the filter material folded into a fold, the first end of the star-shaped filter cartridge. Filter cage without cage, easy to install.

There are many varieties of filter, with thin and long and thick and short points. (Such as φ ≤ 160, L = 1 ~ 2m), the pleats (such as 45 fold) between the large gap, the angle is large, shallow and shallow folds, filter area than the same diameter filter bag 2 ~ 5 times, easy to clean and effective; for concentration ≥ 15g / m dust filter dust, filter wind speed 0.6 ~ 1.2m / min. (Such as φ350, L = 0.66m) large diameter, short length, pleats more (120 ~ 350 fold) and deep, small gap between the gap, large filter area, compared with the same diameter with the same filter bag area 14 ~ 35 times, suitable for small site area, small space layout.

Filter cartridge dust collector installed in three ways: vertical, tilt, horizontal installation. Cartridge vertical installation, pulse cleaning, the dust is easy to settle down to the ash bucket, the effect is good. Tilt installation, the cartridge up and down the stack, compact structure, small footprint, easy to change the tube, but the cleaning, the upper filter dust off the dust on the lower filter, it is difficult to clear. Horizontal installation, the lower part of the filter cartridge dust is more difficult to remove. Tilt installation filter cartridge for small and medium dust removal system non-sticky, low concentration, coarse dust dust, but also for some old bags of dust with the transformation.