Zhangjiagang Aier Environmental Protection Engineering Co., Ltd. 86-+86-0512-58517009 shine@airepe.com
Oval 21m2 F8 1880cfm Air Inlet Filters For Gas Turbines

Oval 21m2 F8 1880cfm Air Inlet Filters For Gas Turbines

  • High Light

    21m2 air inlet filters for gas turbines

    ,

    21m2 gas turbine filters

    ,

    1880cfm air inlet filters for gas turbines

  • Gas Turbine Model
    Oval
  • Filter Cartridge Name
    Gas Turbine Filters
  • Upper Outer ø (cap)
    365mm*288mm*660mm
  • Average Flow
    1510 - 1880cfm
  • Class Of Filtration
    F8
  • Efficiency
    90-95% (ashrae 52.2 - Average Efficiency En-779) For Particles Of 0.4 μm
  • Filter Area
    21m2
  • Place of Origin
    CHINA
  • Brand Name
    AIER
  • Minimum Order Quantity
    Negotiation
  • Price
    Negotiation
  • Packaging Details
    Inner poly bag,Outer cartons
  • Delivery Time
    around 2 weeks upon receipt signed&stamped PO
  • Payment Terms
    T/T
  • Supply Ability
    Around 30000pcs Per year

Oval 21m2 F8 1880cfm Air Inlet Filters For Gas Turbines

 

Cylindrical Cartridge Specifications:

Model
O.D.
I.D.
Length
Filter Area
Filter Media Type
HS/C 3266
324 mm
213 mm
660 mm
21.00 m2
Cellulose
HS/C 3566 352 mm 241 mm 660 mm 23.00 m2 Cellulose
HS/C 3288 324 mm 213 mm 880 mm 27.00 m2 Cellulose
HS/C 3290 324 mm 213 mm 915 mm 28.00 m2 Cellulose
           
HS/P 3266 324 mm 213 mm 660 mm 9.40 m2 Polyester
HS/P 3566 352 mm 241 mm 660 mm 9.40 m2 Polyester
HS/P 3288 324 mm 213 mm 880 mm 12.50 m2 Polyester
HS/P 3290 324 mm 213 mm 915 mm 13.00 m2 Polyester
 

Flange Top Cartridge Specifications:

Model
O.D.
I.D.
Length
Filter Area 1*
Filter Area 2*
HS/F 3266
324 mm
213 mm
660 mm
21.00 m2
9.40 m2
HS/F 3290 324 mm 213 mm 915 mm 28.00 m2 13.00 m2

 

Construction of gas turbine air filter:

Filter media – fully synthetic composite.

End caps – Electrostatic-Coating, Seepage zinc plate, Galvanized (ASTM A653, 60G TST, both sides) or stainless steel.

In / Outside Liner – Electrostatic-Coating, Seepage zinc plate, Galvanized (ASTM A653, 60G TST, both sides) or stainless steel.

Potting – Media shall be permanently and completely bonded to the end caps with Polyurethane or Plastisol or epoxy sealant.

Gasket – Seamless EPDM rubber (ethylene propylene diene monomer rubber - ASTM D1418) or molded in place urethane or polyisoprene sponge rubber.

Pleats are to be stabilized by hot-melt adhesive on both inner and outer cores.

Filters are to have polyester coalescing wrap (per-filter) pre-installed by the manufacturer.

 

*: Filter Area 1: Cellulose, Filter Area 2: Polyester

 

Lug Top Cartridge Specifications:

Model
PSD
Bottom Cap
Length
Filter Area 1**
Filter Area 2**
HS/L 3266
390 mm
324 mm
660 mm
21.00 m2
9.40 m2
HS/L 3288 390 mm 324 mm 880 mm 27.00 m2 10.70 m2
HS/L 3290 390 mm 324 mm 915 mm 28.00 m2 12.50 m2
HS/L 32130 390 mm 324 mm 1300 mm 41.00 m2 18.50 m2