-
GarryGood product Good service Good price
-
MarcoFeedback on the information was timely. Although there was not much cooperation, we had a good experience from Shirley's services and products.
Oval 21m2 F8 1880cfm Filters For Dust Collector

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xGas Turbine Model | Oval | Filter Cartridge Name | Gas Turbine Filters |
---|---|---|---|
Upper Outer ø (cap) | 365mm*288mm*660mm | Average Flow | 1510 - 1880cfm |
Class Of Filtration | F8 | Efficiency | 90-95% (ashrae 52.2 - Average Efficiency En-779) For Particles Of 0.4 μm |
Filter Area | 21m2 | ||
High Light | 21m2 air inlet filters for gas turbines,21m2 gas turbine filters,1880cfm air inlet filters for gas turbines |
Cylindrical Cartridge Specifications:
Model
|
O.D.
|
I.D.
|
Length
|
Filter Area
|
Filter Media Type
|
HS/C 3266
|
324 mm
|
213 mm
|
660 mm
|
21.00 m2
|
Cellulose
|
HS/C 3566 | 352 mm | 241 mm | 660 mm | 23.00 m2 | Cellulose |
HS/C 3288 | 324 mm | 213 mm | 880 mm | 27.00 m2 | Cellulose |
HS/C 3290 | 324 mm | 213 mm | 915 mm | 28.00 m2 | Cellulose |
HS/P 3266 | 324 mm | 213 mm | 660 mm | 9.40 m2 | Polyester |
HS/P 3566 | 352 mm | 241 mm | 660 mm | 9.40 m2 | Polyester |
HS/P 3288 | 324 mm | 213 mm | 880 mm | 12.50 m2 | Polyester |
HS/P 3290 | 324 mm | 213 mm | 915 mm | 13.00 m2 | Polyester |
Flange Top Cartridge Specifications:
Model
|
O.D.
|
I.D.
|
Length
|
Filter Area 1*
|
Filter Area 2*
|
HS/F 3266
|
324 mm
|
213 mm
|
660 mm
|
21.00 m2
|
9.40 m2
|
HS/F 3290 | 324 mm | 213 mm | 915 mm | 28.00 m2 | 13.00 m2 |
Construction of gas turbine air filter:
Filter media – fully synthetic composite.
End caps – Electrostatic-Coating, Seepage zinc plate, Galvanized (ASTM A653, 60G TST, both sides) or stainless steel.
In / Outside Liner – Electrostatic-Coating, Seepage zinc plate, Galvanized (ASTM A653, 60G TST, both sides) or stainless steel.
Potting – Media shall be permanently and completely bonded to the end caps with Polyurethane or Plastisol or epoxy sealant.
Gasket – Seamless EPDM rubber (ethylene propylene diene monomer rubber - ASTM D1418) or molded in place urethane or polyisoprene sponge rubber.
Pleats are to be stabilized by hot-melt adhesive on both inner and outer cores.
Filters are to have polyester coalescing wrap (per-filter) pre-installed by the manufacturer.
*: Filter Area 1: Cellulose, Filter Area 2: Polyester
Lug Top Cartridge Specifications:
Model
|
PSD
|
Bottom Cap
|
Length
|
Filter Area 1**
|
Filter Area 2**
|
HS/L 3266
|
390 mm
|
324 mm
|
660 mm
|
21.00 m2
|
9.40 m2
|
HS/L 3288 | 390 mm | 324 mm | 880 mm | 27.00 m2 | 10.70 m2 |
HS/L 3290 | 390 mm | 324 mm | 915 mm | 28.00 m2 | 12.50 m2 |
HS/L 32130 | 390 mm | 324 mm | 1300 mm | 41.00 m2 | 18.50 m2 |